Sewing Tutorial: How to make a long sleeve shirt
Thanks for visiting On the Cutting Floor today! This is the Sewing Tutorial: How to make a long sleeve shirt
If this is your first time in our blog, remember to check our FREE SEWING PATTERNS page.
On that page you will find our collection of free sewing patterns for women, kids and men.
You can also visit our SEWING TUTORIALS and our SEWING REVIEWS.
We also have an ETSY STORE, where you will find unique and modern sewing pattern for women.
Sewing Tutorial: How to make a long sleeve shirt
- Gather front and back bodice pieces and bring them to your sewing table.
2. Now place them together, right sides facing and match shoulder seams.
3. Pin the shoulder seams and stitch them together. For this top, I used an overlocking stitch from my sewing machine (no serger used on this pattern!) Repeat with the other side and press gently.
4. Then, turn the top to the right side and open so you can see front and back bodice on their right sides.
5. Bring the sleeves to the table and place them horizontally, matching the middle of the cap of the sleeve to the shoulder seam.
6. Now turn the sleeve around and start pinning the sleeve to the bodice.
7. Start from the middle to the sides of the sleeve until it is ready
8. Now, stitch the sleeve to the bodice together, and repeat with the other side.
8. After the sleeves are attached to the bodice, fold it and pin the sleeves and sides of the t-shirt.
The hemline:
9. Fold the hemline 1 inch from the bottom of the t-shirt. Press with your iron and take it to the sewing machine. Use a zigzag stitch for the hemline and the cuffs as well. 
10. Cuffs also have 1 inch seam allowance, so repeat the step 9 for the cuffs. Press them again when finished.
Collar:
11. Fold the collar in half, lengthwise and press flat with your iron.
12. Now, fold again widthwise. Press the collar flat.
13. Pin the collar to the neckline. Remember that the collar is 20% smaller than the neckline. That means, that you will need to stretch the collar to adjust to the neckline.
14. Stitch them together. I usually baste the neckband to the neckline first and then, stitch them with an overlock stitch. Press and turn the collar to the right side.
14. After the neckband has been attached properly, topstitch the neckband with a 1/8 to 1/4 inch stitch from the edge.
And that is all,
Thank you so much for reading this post.
DOWNLOAD THE PATTERN HERE
